2pc Large Motorcycle Heavy Duty Hard Waterproof Saddlebags For Honda Uv7i
2PC LARGE MOTORCYCLE HEAVY DUTY HARD WATERPROOF SADDLEBAGS FOR HONDA - UV7I. Dimensions : 19" W (with pocket) x 10" H x 6 D. Dimensions : 14" W (without pocket) x 10" H x 6 D. High Quality Leather Like Heavy Duty PVC. Hard Sheet Inside to Hold its Shape.
Heat Protection on bottom of bag. Large size for plenty of item space. 2 Tie Down Ribbons On Each bag.
Zip off bag w/ heavy duty Velcro cover. Medium 2 Strap Saddle Bag.Two side pockets on each saddlebag. Dual quick release straps for quick and easy access. Adjustable yolk so you can hang the bags high or low.
Tough, Waterproof and ready to go! This is a great way to travel! Lots of room to pack what you need for your next trip or rally or is great for last minutes trips. The PVC is rugged so it will last for many years. Each bag is waterproof so all of your belongings will stay safe and dry in your motorcycle luggage set.
The Saddle bags will accommodate most all storage needs while offering unsurpassed protection from the elements. Every biker needs a good set of luggage for keeping their belongings safe while riding motorcycles. It is easy on and easy off for quick installation and removal. Could be used as Throw Over or can be mounted (using mounting brackets - not included). These bags will look great on your bike! Please Note : Since every motorcycle is different, the compatibility chart is just for reference only.We are reasonable people so if something should come up, just tell us. We understand thing happen from time to time and are more than happy to work with you. Below is a guideline for determining if a set of saddlebags will fit on your bike. It works in most cases, but not all First you'll need a ruler or measuring tape. Take a side to side measurement: Measure side to side, from the back of the saddle, (riders position) to the arm of the directional signal, you'll need to compare this measurement with our length measurements of the desired saddlebag.
This measurement should be greater than the bags length. (See image below for reference) B. Take a top to bottom measurement. Measure from the bottom of the seat pad to the top of the exhaust pipe as a reference. This measurement must be at least 1 inch greater than the height of the desired saddlebags (see picture below for reference). Measurement of bag are given in the item description of the listing. HOW TO INSTALL OUR SADDLEBAGS. Use a screwdriver to remove the screws securing the motorcycle seat to the frame. Slide the seat forward then backward to remove the keyhole and tank brackets.A single screwdriver should be sufficient to remove the seat, depending on the bike model. Untie the yoke, which is usually held together with leather or nylon strips. The yoke is the part of the saddle bags that goes under the seat. Place each saddle bag where you want them to sit on your bike. The yoke lays under the seat, with a saddle bag on each side of the bike.
The best location is usually over the shocks. Mark where the yoke is positioned over the hardware on the bike and where it overlaps, using a permanent marker.Make sure the marks you made line up with each other and that the pre-made holes line up. If they do not, drill holes through the yoke and tie them together with a strip of leather taken from the yoke.
You are basically re-threading the yoke's ties. Place the saddle bags back on your bike and position them. Reinstall the motorcycle seat by replacing the screws. Examine the saddle bags to make sure they are not resting on anything that may become entangled with them.