YAESU G-2800DXA Heavy-Duty Large antenna rotator for HF/VHF/UHF antennas NEW

Heavy duty type for large HF antenna G-2800DXA. Slow start/slow stop function that automatically controls speed and reduces impact to the antenna boom. A wide range of speed setting functions allow quick antenna control, and a preset control function allows one-touch setting of antenna direction. When rotating at high speed, it automatically decelerates and stops. Reversal delay function automatically sets a 1-second delay time to reduce the burden on the antenna even if a sudden reversal operation is performed.

450 degree wide angle rotation for a wide range of operations. With overlap display when rotating more than 360 degrees. Safely designed to operate at low voltage of 30V or less.

The starting position of the pointer and the direction sheet (N/S) can be freely set according to the location. Optional GS-232B allows control by a computer compatible with RS-232C. A mast gauge with a mast clamp divided into two parts allows you to easily align the mast with the center of the rotator. Braking force (kgf-cm): 25,000. Rotating force (kgf-cm): 800 to 2,500.

Antenna coefficient (k): Maximum 950. Wind pressure area: 3.0 or less. Instantaneous vertical load (kg): 1200.

360 degree horizontal rotation time (seconds): 50 to 120. Compatible mast diameter (mm): 48-63. Rated operating time: 3 minutes continuously. Controller dimensions (mm): 200 x 130 x 193. Please check your country's voltage before order.

Because most of country's voltage is higher than 100V. To :US, Asia , Australia, Canada.

---